"Mode" Button - Powerpeak FTM6716 Bedienungsanleitung

"PROGRAM" BUTTON
When the treadmill is not running, press this button can circle choose from manual mode to pre-set
mode P1-P12 and body fat;

"MODE" BUTTON

When the treadmill is not running, press this button to choose countdown
modes:"H-1","H-2","H-3";:H-1" is the time countdown mode, and "H-2" is the distance countdown
mode, "H-3" is the calorie countdown mode; press the "SPEED+/-" or "INCLINE+/-"button to adjust
the data. After that, press the "START" button to start this treadmill
"SPEED +/- "BUTTON
SPEED +/– --Adjust speed when treadmill start, the increment is 0.1km/time in kilometer. Press the
button more than 2 seconds, and it will be up or down automatically.
SPEED QUICK BUTTON
Press the speed quick button 3km/h，6km/h，9km/h to adjust the speed directly when the
treadmill
is running
"INCLINE+/-" BUTTON
INCLINE +/ – --Adjust incline when treadmill start; the increment is 1 level/time. Press the button
more than 2 seconds, and it will be up or down automatically
INCLINE QUICK BUTTON
Press the incline quick button 3，6，9 to adjust the incline directly when the treadmill is running
DISPLAY FUNCTION
SPEED
Display running speed
TIME
Display the running time or countdown time
DISTANCE
Display the running total distance or distance countdown.
CALORIE
Display the calorie or calorie countdown
INCLINE
Display the incline
PULSE
Display pulse data
ALL WINDOW DISPLAY DATA RANGE
TIME：0:00 – 99.59(MIN)
DISTANCE: 0.00 – 99.9(KM)
CALORIES: 0.0 – 999 (C)
SPEED: 0.8-16.0(km/h)
PULSE: 50 – 200 (BPM)
INCLINE：0 – 12
PULSE FUNCTION
When the treadmill is running, hold the hand pulse about 5 seconds, it will display pulse data. The
pulse data range is 50-200 times/ minute. It has heart-shaped graphics when testing pulse. This
data is only for reference, cannot be as medical data.
50