ELAC AS-61 Bedienungsanleitung Seite 5

Installing and Removing the Magnetically Attached Grills
The mesh grills of your Adante speakers are designed to be removable if desired. To remove it, hold the top or
bottom edges of the grill and pull gently. To replace the grill, place the grill in the normal position on the cabinet
and the magnets will hold the grill in place.
Speaker Connections
The Adante speakers are designed to use conventional wiring as well as Bi-Amping or Bi-Wiring. For
conventional wiring leave the metal jumpers in place and connect the + (Red) and Black (-) connectors on your
amplifier to the + (Red) and Black (-) connectors on the speakers as shown in Fig 1 . For Bi-Amping remove the
metal jumpers and follow the diagram on Fig 2. For Bi-Wiring remove the metal jumbers and follow the diagram
in Fig 3.
High Frequency Amplifier
Amplifier Low Frequency Am plifier Amplifier
Fig. 1—Single WIring Fig. 2 —Bi-Amping Fig. 3—Bi-Wiring
ELAC Adante Speakers | www.elac.com | Page 4