Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Intended Operation
The device is intended for repairing surfaces of laminate, cork,
hardwood floors, wood, and plastic by melting a suitable wax.
Inserting the Batteries
Remove the battery compartment cover from the underside of the
unit. Insert two batteries 1.5 V LR6 (AA) with correct polarity.
Polarity symbols are on the unit.
If reaching the operating temperature requires more than 30
seconds the batteries should be replaced.
Included Items
1x
Wax Melter with Protective Cap
2x
Battery LR6/AA/1.5 V
1x
Scraper
1x
Flattening Tool
1x
Abrasive Sponge for degreasing the Surface
1x
Cleaning Cloth
11x
Wax Sticks in different Colours
1x
Manual
1x
Hard Case
Preparations
Clean the damaged area with the scraper and remove all loose
parts. If the edge of the damaged area is ragged, use the scraper to
flatten it.
Colour Selection
Select the suitable colour wax sticks. Start with lighter colours and
use the darker shades to adjust the colour. For genuine wood also
use the opaque white wax to add depth to the mixture.
Operation
10
Werbung
Inhaltsverzeichnis
