Hints And Tipps - KKT KOLBE IND7704DRAFT Bedienungsanleitung

Cooking guidelines
What? How?
Spillovers on
1. Switch the power to the cooktop off.
the
2. Soak up the spill
touch controls 3. Wipe the touch control area with a
clean damp sponge or cloth.
4. Wipe the area completely dry with a
paper towel.
5. Switch the power to the
cooktop back on.
Soiled metal 1. Remove the cover and take out the
grease filter of
grease filter.
the hood
2. Soak the filter in hot soapy water,
clean it with a soft brush and rinse well
with hot water. (If necessary, repeat the
process.)
3. The metal fat filters can also be clea-
ned separately from the dishes in the
dishwasher in a standard program with
55 ° C. (If necessary, soak in hot soapy
water first.)
13. Hints and Tips
Problem Possible causes
F3/F4 Temperature sensor of the induction
coil failure
F9/FA
Temperature sensor of the IGBT
failure.
E1/E2 Abnormal supply voltage
E3
High temperature of the induction
coil temperature sensor.
E5 High temperature of the IGBT tempe-
rature sensor
The above measures are an excerpt of possible causes.
Never make changes yourself or dismount the hob to prevent injury or accidents.
50
Important!
• The cooktop may beep and turn itself
off, and the touch controls may not
function while there is liquid on them.
Make sure you wipe the touch control
area dry before turning the cooktop
back on.
• Avoid using alkaline dishwasher
cleaning agents (ph value over 7).
• Frequent cleaning or the use of ag-
gressive cleaning agents can cause co-
lor changes of the metal surface. These
have no influence on the filter function
and are not a reason for complaint.
What to do
Please contact the supplier.
Please contact the supplier.
Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
Please contact the supplier.
Please restart after the hob cools down.