Introduction; Features; Mic Preamplifier - Omnitronic LH-075 Bedienungsanleitung

LH-075 Tube mic preamplifier
For your own safety, please read this user manual carefully before you initial start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen an OMNITRONIC LH-075. If you follow the instructions given in this manual,
we are sure that you will enjoy this device for a long period of time.
Unpack your LH-075.
Before you initial start-up, please make sure that there are no transport damages. Should there be any, do
not take the device into operation and immediately consult your dealer.

Features

Mic preamplifier

• For connecting a microphone via XLR-socket or jack socket
• Signal output via XLR-plug or jack socket
• Gain-control
• Clip LED
• Phantom-power can be switched
• Limiter can be switched
• Phase Reverse
• Gain +20 dB switch for low-level mics
• Drive-control
• Output LED-level-meter with Peak-LED
• Power supply via power unit
• Modern convex housing design
• Full-rubber-housing corners for safe operation
• Cables can be routed under the housing
USER MANUAL
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
8/11 10355075_V_1_0.DOC