Using The Option On-Screen Display; Degaussing The Screen; Changing The On-Screen Display Position - Sony GDM-30O1PT Bedienungsanleitung

Customizing Your Monitor
Using the OPTION On-screen
Display
The OPTION OSD allows you to manually degauss the
screen and adjust settings such as the OSD position and
power saving delay time. It also allows you to lock the
controls.

Degaussing the screen

The monitor screen is automatically degaussed
(demagnetized) when the power is turned on.
You can also manually degauss the monitor.
1
Press the button.
The MENU OSD appears.
2 Press the ¨./> and >?// buttons to select "
OPTION," and press the
The OPTION OSD appears.
3 Press the ¨./> buttons to select "
DEGAUSS)."
4 Press the > / button.
The screen is degaussed for about 3 seconds.
If you need to degauss the screen a second time, wait for at
least 20 minutes before repeating the steps above.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the
14
button again.
OPTION
ON
ZZ...
1 MIN
UNLOCK
MANUAL DEGAUSS
(MANUAL
button again.

Changing the on-screen display position

You can change the OSD position (for example, when you
want to adjust the picture behind the OSD).
1
Press the button.
The MENU OSD appears.
2
Press the ¨./> and >?// buttons to select "
OPTION," and press the
The OPTION OSD appears.
3
Press the ¨./> buttons to select "
POSITION)" or " (OSD V POSITION)."
Select " (OSD H POSITION)" to adjust the horizontal
position.
Select " (OSD V POSITION)" to adjust the vertical
position.
4 Press the >?// buttons to move the OSD to the
desired position.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the
To reset, press the ? (reset) button while the OSD is on.
button again.
OPTION
ON
ZZ... 1 MIN
UNLOCK
MANUAL DEGAUSS
(OSD H
OPTION
ZZ... 1 MIN
UNLOCK
OSD H POSITION
OPTION
1
ZZ...
UNLOCK
OSD V POSITION
button again.