Selecting The Input Signal - Sony GDM-30O1PT Bedienungsanleitung

Selecting the Input Signal

This monitor has two signal input connectors (HD15 and
5BNC) and can be connected to two computers. When the
power of both computers is on, select the input signal you
want to view as follows.
1
Turn on the monitor and both computers.
2
Press the button.
The MENU OSD appears.
3 Press the ¨./> and >?// buttons to select "
OPTION," and press the
The OPTION OSD appears.
4
Press the ¨./> buttons to select "
5 Press the >?// buttons to select "1" or "2."
When "1" is selected
The signal from the computer connected to the HD15
connector is input to the monitor.
When "2" is selected
The signal from the computer connected to the 5BNC
connectors is input to the monitor.
MENU OK
MENU
COLOR CENTER SCREEN
GEOM EXIT ZOOM
LANG SIZE OPTION
button again.
OPTION
ON
ZZ...
1 MIN
UNLOCK
MANUAL DEGAUSS
(INPUT)."
OPTION
1 2
ZZ... 1 MIN
UNLOCK
INPUT
Getting Started
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the
For more information on using the OSD, see "Introducing
the On-screen Display System" on page 8.
When you connect computers to both connectors
If you restart the computer you want to view, or that
computer is in power saving mode, the monitor may
automatically select the other connector's signal. This is
because the monitor switches from the interrupted signal to
the constant signal. If this happens, manually select the
desired signal.
Getting Started
button again.
7
EN
F
ES
C