Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GWS Professional 18V-10 C Originalbetriebsanleitung

24 | English
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Caution! When using the power tool with Bluetooth
u
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
®
Bluetooth in aircraft. Avoid using the product near
your body for extended periods.
®
The Bluetooth word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for cutting, roughing and brush-
ing metal and stone materials without the use of water.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
®
With the GCY 30-4 Bluetooth Low Energy Module that is fit-
ted in the power tool, data and settings of the power tool can
be transferred between the tool and a mobile device by
®
means of Bluetooth wireless technology.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard

Technical Data

Angle grinder
Article number
Rated voltage
Rated speed
1 609 92A 4B1 | (09.05.2018)
(2) Direction of rotation arrow on housing
(3) Spindle lock button
(4) LED work light (GWS 18V-10 SC)
(5) User interface
®
, a
(6) On/off switch
(7) Bluetooth module cover
(8) Battery
(9) Battery release button
®
in the vicinity of
(10) Auxiliary handle (insulated gripping surface)
(11) Protective guard for grinding
(12) Hub flange with O‑ring
(13) Grinding disc
(14) Quick-clamping nut with bar
(15) Carbide grinding head
(16) Protective guard for cutting
(17) Cutting disc
(18) Handle (insulated gripping surface)
(19) Grinding spindle
(20) Hand guard
(21) Rubber sanding pad
(22) Abrasive disc
(23) Round nut
(24) Cup brush
(25) Diamond core cutter
(26) Button for charge indicator (GBA 18V...)
(27) Battery charge indicator (GBA 18V...)
(28) Button for charge indicator
(GBA 18V 6.3 Ah, ProCORE18V...)
(29) Battery charge indicator
(GBA 18V 6.3 Ah, ProCORE18V...)
(30) Extraction guard for cutting with a cutting guide
(31) Diamond cutting disc
(32) Battery charge indicator (user interface)
(33) Speed preselection level indicator (user interface)
(34) Speed preselection button (user interface)
(35) Power tool status indicator (user interface)
(36) Overload protection indicator (user interface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 18V-10 C
3 601 JG3 0..
V=
rpm
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
GWS 18V-10 C GWS 18V-10 C
3 601 JG3 2.. 3 601 JG3 1..
18 18
9000 9000
Bosch Power Tools
A)
A)
18
9000