Assembly - FLORABEST Z29544 Montageanleitung

Assembly

Q
j
Make sure that you mount the product in a place where it is
exposed to the sun.
NOTE: You will need a drill for the assembly work.
CAuTION! RISK OF INjuRy! Consult the directions for
use that came with your drill.
J
CAuTION! WATER DAMAGE! Before drilling, ensure that
there are no water pipes where you intend to drill.
J
Examine the wall before installation and choose suitable in-
stallation fixings. We have supplied fixings suitable for an or-
dinary solid masonry wall.
j
Screw the lamp
j
Screw the nuts
j
Hold the back
right height for mounting it onto the wall. You may need to use
a spirit level to help you.
j
Mark the boreholes with a pencil.
j
Use a drill to bore both holes into the wall with the aid of a
6 mm drill.
j
Place the dowels
j
From the back, place the screws
for them in the back
j
Mount the back
into the dowels
j
Place the base
screws can also be put through the base.
4
j
Screw the nuts
onto the base
7
anticlockwise off the base
6
up against the wall in order to work out the
3
into the boreholes.
5
.
3
onto the wall by turning the screws
3
.
5
onto the back
8
onto the screws
6
(see Fig. A).
8
(see Fig. C).
8
into the holes designated
4
in such a way that the
3
in order to fix the base
4
GB/IE/CY
2
.
8
9