Westfalia 87 39 54 Bedienungsanleitung Seite 42

 Never cut materials containing asbestos with this angle grider.
 Secure the work piece and place suitable wedges under the
work piece. When operating the angle grinder, do not press
the cutting disc too hard on the work piece. The self weight of
the angle grinder is enough to perform the cut. Avoid
overheating the cutting disc; allow the disc to cool down
sufficiently.
 Make sure the cutting disc cannot get jammed or laterally
stressed while cutting. The cutting disc must be inserted
straight into the cutting gap of the work piece.
 Always try to cut the work piece in one go.
Operation
38