Troubleshooting - Nintendo 3DS Bedienungsanleitung

Hold the accessory as shown here.
5. Removing the Circle Pad Pro
Ensure that the Nintendo 3DS system is closed. Gently lift up
the system from the front until it is free of the accessory.
Do not leave the system open and do not lift it using the upper
screen, as this can lead to accidents.
8

6. Troubleshooting

Before contacting Nintendo Customer Support, check the points below. Please also
consult the instruction manual of the relevant software.
Problem
Is the Circle Pad Pro in standby mode?
•
The Circle Pad Pro will enter standby mode after
5 minutes of inactivity. To exit standby mode, press
the ZL or ZR Button.
The Circle Pad Pro
is not work ing
properly.
Is the Nintendo 3DS system inserted properly?
•
Ensure that the system is slotted in correctly and that
the bottom of the system touches the accessory.
Is the battery correctly inserted?
•
Insert 1 x AAA (LR03) battery correctly.
Has the battery run out?
•
Insert a new battery.
Is the software compatible with the Circle Pad Pro?
•
Check for this logo on the packaging of the
software to ensure it is compatible with this
accessory.
Is the Right Circle Pad correctly calibrated?
•
The Right Circle
If the Right Circle Pad is not following your motions, or
Pad is not follow­
is sending motions to the software while you are not
ing my motions
using it, then it may be incorrectly calibrated. Refer to
accurately.
the soft ware instruction manual for information on cali-
brating the Right Circle Pad.
The Circle Pad Pro can only be used while compatible soft-
The R Button on
ware is running. Functions available while the software is
the Circle Pad Pro
suspended, such as the HOME Menu or internet browser,
does not work.
cannot be controlled using the buttons on the Circle Pad Pro.
Solution
9