Inserting The Battery - Nintendo 3DS Bedienungsanleitung

• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries must be removed from the accessory before being charged.
• To preserve battery life, remove the battery from the accessory if you do not plan
to use it for some time.
• Do not use damaged, warped or leaking batteries.
• If the battery leaks, discontinue use immediately and contact Nintendo Customer
Support. Use in this state could lead to further accidents.
m CAREFUL USAGE
• Do not store at extreme temperatures.
• Do not expose the battery to excessive physical shock.
• Ensure that you dispose of the battery in accordance with local regulations.

3. Inserting the Battery

The Circle Pad Pro requires one AAA (LR03) battery. Follow the instructions below
to insert the battery.
Note: If a child will be using the accessory, a parent or legal guardian should carry out this procedure.
Remove the battery cover.
Use a coin or a flat screwdriver
to turn the screw and remove
the battery cover.
Insert the battery.
Insert the minus (–) end of the battery first. Ensure that
the battery is facing the correct direction.
Note: When removing the battery, remove the plus (+) end first.
Replace the battery cover and screw.
6
m CAUTION
4. Connecting the Circle Pad Pro
Connect the wrist strap to
the Nintendo 3DS system.
Pass the wrist strap cord through the strap slot in
the Circle Pad Pro.
Insert the Nintendo 3DS system into the Circle Pad
Pro until the bottom of the system touches the
accessory.
Open the lock lever on the wrist strap and insert
your hand.
Tighten the strap lock and close the lock lever.
The lock lever should make a clicking sound.
Click
7