Oase Aquarius Universal Classic 440 Gebrauchsanleitung Seite 11

- EN -
The device may only be connected if the electrical data of the device and the
power supply coincide. The device data is to be found on the device type plate,
on the packaging or in this manual.
Ensure that the unit is fused for a rated fault current of max. 30 mA by means
of a fault current protection device.
Extension cables and power distributors (e. g. outlet strips) must be suitable for
outdoor use.
Protect the plug connections from moisture.
Only plug the unit into a correctly fitted socket.
Safe operation
Never operate the unit if either the electrical cables or the housing are
defective!
Do not carry or pull the unit by its electrical cable.
Route cords/hoses/lines in a way that they are protected against damage, and
ensure that they do not present a tripping obstacle.
Only open the unit housing or its attendant components, when this is explicitly
required in the operating instructions.
Only execute work on the unit that is described in this manual. If problems
cannot be overcome, please contact an authorised customer service point or,
when in doubt, the manufacturer.
Only use original spare parts and accessories for the unit.
Never carry out technical modifications to the unit.
The power connection cables cannot be replaced. When the cable is damaged,
the unit or the component needs to be disposed of.
Only operate the unit if no persons are in the water!
Keep the socket and power plug dry.
The impeller unit in the pump contains a magnet with a strong magnetic field
that may affect the operation of pacemakers or implantable cardioverter
defibrillators (ICDs). Always keep magnets at least 20 cm away from implanted
devices.
11