o
ELECTRICAL
CONNECTION
ATTENTION!
Before connecting this appli
ance to the mains supply:
• Ensure that the mains volta
ge corresponds to the voltage
on the rating plate, inside the
hood.
• Disconnect the hood from
the mains supply.
• Connectthehoodtothe mains
supply via a double pole switch
which has 3mm minimum clea
rance between the contacts.
• The socket must be earthed
and conform to the national nor
ms and local electricity supply
regulations.
• Fit a plug with earth contacts
to the mains cable that conforms
to the National norms and local
electricity supply negotiations
and using a 3A fuse where pos
sible in the line.
• Insert the plug in the socket.
• Putthe mains switch in postition
(I) = (ON).
The cooker hood is ready to
be used.
ELEKTRISCHER
ANSCHLUSS
ACHTUNG!
Vor dem elektrischen Ansch
luß:
• Es ist sicherzustellen, daß
die Netzspannung den An
schlußwerten auf dem Typen
schild im Inneren der Dun
stesse entspricht.
• Haube stromlos machen.
• Beim Anschluß der Dunstesse
an das Wechselstromnetz ist
ein zweipoliger Schalter mit
einem Öffnungsweg von wenig
stens 3mm für jeden Pol zwi
schenzuschalten.
• Es ist sicherzustellen, daß die
elektrische Anlage des Wohn
hauses über eine vorschriftsmä
ßige Erdung verfügt.
• Vorschriftsmäßig geerdeter
Stecker am Anschlußkabel an
bringen.
• Stecker in die Steckdose ein
fügen.
• Zentralschalter auf Position (I)
= (ON) setzten.
Die Haube ist jetzt für den Ge
brauch geeignet.
48
\ \ 1 / /
L.
VOLT
MOD
'...............................Hz TOT.........................W
@1x............ W Ix.... W MAX
9211