GGP ITALY SPA RIDER 63 Gebrauchsanweisung Seite 49

3.6 FITTING THE GRASS-CATCHER
Identify the screws to be used by follow-
ing the drawing that shows them in their
actual size.
1. Fit the upper frame (1) in the upper
slots (2) of the canvas cover (3);
2. join the two pieces of the frame (1)
and (4) using the screws (5). Fit the
two tie rods (6) and fasten them by
using the screws (7);
3. hook the plastic profiles (8) onto the
front frame tubes (4) with the aid of a
screwdriver (9).
4. insert the handle (10) into the holes of
the cover (11) and attach this to the
frame using the screws (12);
5. fit the rear handle (13) and fasten it
with the screws (14).
10 12
1
5 2
5
1
6
4
8
9
5 (x 2)
7 (x 4)
13 14
11 10
12
8 4
14
1
2
1
3
6
7
12 (x 2)
14 (x 2)
EN
13
4
7
11