Technical Specifications - JB Systems POWERED T-BAR 4 CHANNELS DMX Bedienungsanleitung

WARNING
This apparatus must be earthed at all times.
•
To prevent fire or shock hazard: do not expose this apparatus to rain or moisture of any
•
kind.
The memory back-up function when power down is effective during one month. When
•
using the same unit after more than one month, all memory will be lost and new settings
have to be made.
The duration between power OFF and power ON should be one minute at least. Otherwise it
•
may result in malfunction or damage.
If malfunction or damage occurs when in use, reset immediately.
•
To prevent current over 20 A, use an external circuit breaker of 20 A, and limit the complete
•
current (fifth – direct – plug included) to 16 A.
To branch a foot control, a stereo jack is needed:
•
- continuous contact tip – mass = FULL ON
- impulse contact ring – mass = STAND BY

TECHNICAL SPECIFICATIONS

Power Input ....................... AC 230 V ~ 50 Hz (16 A)
Channel Output .................. 5 A per channel (total 20 A)
Fuse .................................. 6,3 A / 250 V
Dimensions ........................ 1300 x 100 x 100 mm
Net Weight......................... 4,5 kg.
DMX Bar 4 4