Werbung
•
If the heater is left off for a lengthy
period or when cleaning it, switch
it off with the switch (3, fig. 2.1,
page 8) on the side.
•
After the installation the line
connection has to be accessible.
•
The installation and electrical
connection of the heater must be
carried out by an approved skilled
person.
3 Installation
Wall mounting
The heater must be mounted vertically
(see fig. 2.1, page 8).
Fix the appliance bracket to the wall
as shown in the installation sketch
(fig. 3.1 and 3.2), using the enclosed
installation materials. See fig. 3.1 on
page 9 for installation measurements.
It is essential to maintain the minimum
distance of 20 cm from the floor to the
lower fixing hole.
Hook the heater into the lower fixing
hooks.
Insert the upper fixing clips (7, fig. 3.3)
in their positions and press in.
10
6 bracket
7 fixing clips
8 hooking tab
Fig. 3.2 Fixing
Appliance
a
type
VER 75/3
340
VER 100/3
420
VER 150/3
580
VER 200/3
740
VER 250/3
900
Distance from wall with appliance bracket 20 mm
Tabelle 3.1 Distance
7 fixing clips
Fig. 3.3 Mounting
b
c
84
430
164
430
324
430
484
430
564
430
d
e
289
> 200
289
> 200
289
> 200
289
> 200
289
> 200
Werbung
