Cocraft NLL01 Bedienungsanleitung Seite 4

Operating instructions
Note: Read the entire instruction manual ensuring that you have read all safety
guidelines and understand how the laser spirit level operates before turning it on.
Incorrect usage can lead to permanent eye damage.
Note: The laser spirit level is a precision instrument. Handle it with care.
Batteries
1. Release the spring catch on
the battery cover (8) and remove it.
2. Insert 2 × AAA/LR03 batteries
into the battery compartment in
accordance with the markings.
3. Refit the battery cover.
Switching on/off and selecting the function
The laser spirit level is switched on/off
using the power switch/function selector (1).
The switch has the following settings:
• Laser line (forwards toward the laser
outlet apertures).
• Off (in the middle).
• Laser dot (backwards).
The laser spirit level should be switched off
when not in use to save the batteries.
Placement
The laser spirit level can be used in various different positions.
1. The laser spirit level should always be placed (with or without wall holder) on a firm,
flat surface.
2. The included wall holder (11) can be used to attach the laser spirit level to a wall.
The wall holder can be attached to a wall using a drawing pin or push pin. The wall
holder also has a hole (15) for hanging it on a nail or screw.
3. For use with a tripod (sold separately) the wall holder has a 1/4" tripod mount thread (14).
Aligning the spirit level
The horizontal and vertical alignment of the laser spirit level should be adjusted using
the bubble vials. When the the laser spirit level is in the wall holder and on a wall
the level or plumb alignment can be adjusted by moving the edge of the wall holder.
When the laser spirit level is in the wall holder and mounted on a tripod it can be
aligned using the adjustment knob (13). Make sure that the bubble is centred between
the lines on the bubble vial.
4