Changing The Operating; Language; System Settings - Hama 00095214 Bedienungsanleitung

Changing the operating language
The operating language is set to German („Deutsch") at the factory. To
change this setting, proceed as follows:
 Press the "SETUP" button on the remote control.
 Select "Menu Language" – "OSD" and then the desired operating
language, and confi rm your selection by pressing the "ENTER"
button.
 Exit the menu by pressing the "EXIT" button on the remote
control.

System settings

Select "Setup" from the main menu and confi rm with "Enter" to open
the system menu. The following menu items are available:

Language

Time interval
File description
Folder manage-
ment
Aspect ratio
Slide show
mode
LCD power
saving mode
Slide show
sequence
Display setting
Format
Standard
setting
System infor-
mation
Select the desired language menu/operating
language.
Select the time interval at which the photos
should change.
Select whether or not the fi le name of the photos
is to be displayed.
Select whether or not all folders are to be dis-
played.
Here, you can select the desired display type for
your photos. Normal, stretch, crop
Select the slide show type: Individual photos or
multishow.
Select when your device is to switch to power
saving mode.
Select whether your photos are to be displayed
sequentially or randomly
Set the brightness, contrast and saturation of the
device.
Function menu for displaying the format of the
storage medium.
Function menu to reset to factory settings.
Function menu for displaying the software infor-
mation for the device.
GB
33