Wall Mounting; Inserting Or Changing The Battery - Hama 00118572 Bedienungsanleitung

6.2 Wall mounting

Alternatively, you may use the threaded hole on the back of the device to mount it to the wall
using a VESA-compatible wall bracket.
Note on available accessories
You can find a selection of compatible Hama products at www.hama.com.
Note
• Before mounting, check that the wall you have chosen is suitable for the weight to be
mounted Also make sure that there are no electric, water, gas or other lines running
through the wall at the mounting site.
• Buy special or suitable installation material from a specialised dealer for wall-mounting.
• Do not mount the product above locations where persons might linger.

6.3 Inserting or changing the battery

GB
• Open the battery compartment of the remote control (Fig. B).
• Insert a type CR2025 button cell battery, observing polarity.
• Remove the contact breaker strip from the battery if present.
• Close the battery compartment. Make sure that the cover closes easily and tightly.
8
2
1