Grundig GSBS14620XWF Bedienungsanleitung Seite 31

2. Pressing the button numbered 1
for a duration of 3 seconds starts
the initial identification of the
product to the home network.
3. Open the app you have downloaded
to your smart device.
4. Press the REGISTER button on
the lower part of the screen if you
do not have a user registration
already.
(You may log in by entering your
E-mail and password if you have
already registered.)
5. Enter the information required
and press the Finish button and
then click on the link sent
to your e-mail address to confirm
your e-mail address.
6. Fill in the E-mail and password
fields on the main screen of the
app (using the information you
have entered during registration)
and press the LOG IN button.
7. Appliances page shall be opened.
Press the Add/Remove Appliance
button on this page.
8. Press the Press here to add the
appliance to your network button.
9. You may follow the other steps as
per the instructions on the app.
You may follow the steps provided
below as a reference.
10. Go to the Settings on your smart
device and connect to "HomeWhiz-
Refrigerator-xxxx" network from
the Wi-Fi networks section.
Network password may be seen
from the HomeWhiz app.
RO
PL
CZ
29