Herunterladen Inhalt Inhalt Diese Seite drucken

Working With The Cordless Sweeper; Cleaning And Care; Housing; Dirt Container - Silvercrest SABD 3.6 Li A1 Bedienungsanleitung

Akku-besen
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Working with the
cordless sweeper
WARNING! RISK OF INJURY!
Hold the end of the rotary brush 9, the rod and
the appliance openings away from your face
and body.
NOTE
Never use the appliance without the dirt contai-
ner 8 attached. The dirt will simply be swirled up!
Press the switch 4 to switch the cordless
sweeper on.
Move the cordless sweeper across the fl oor.
By pressing the switch 4 again, you will turn
the appliance off .
You can leave the handle 2 engaged in the vertical
position during breaks.
NOTE
On some kinds of carpets, the cordless sweeper
may clatter or jump. If this is the case, work
slowly and in the opposite direction.

Cleaning and care

DANGER – ELECTRIC SHOCK!
Do not clean the appliance while charging it.
Always disconnect the battery charger from
the mains power socket before cleaning the
appliance!
NEVER immerse the appliance in water or
any other liquid!
WARNING! RISK OF INJURY!
Ensure that the appliance is not accidentally
switched on without the dirt container 8 at-
tached or while cleaning the rotary brush 9.
Risk of injury!
SABD 3.6 Li A1
ATTENTION! MATERIAL DAMAGE!
Do not use abrasive or aggressive cleaning
materials. These may damage the surfaces of
your appliance.

Housing

Wipe off the housing of the appliance with a
damp cloth. If required, use a mild detergent on
the cloth.
Ensure that the appliance is completely dry
before reconnecting it with the battery charger.

Dirt container

To ensure that the performance of the cordless
sweeper does not deteriorate, empty the dirt
container 8 after every use.
Press the release knob 7 of the dirt container 8
to detach it from the appliance.
Pull the dirt container 8 off the appliance while
keeping the release knob 7 pressed.
Empty the dirt container 8 and push it back
onto the appliance so that it sits fi rmly on the
appliance and clicks into place on the release
knob 7.

Rotary brush

If the rotary brush 9 stops turning because of a
severe dirt accumulation or because threads have
caught around it, proceed as follows:
Remove the rotary brush 9:
1) Turn the cordless sweeper around and hold it
so that the fl at side with the rotary brush 9 is
facing you.
2) Push the small catch 0 back so that the cover
can be removed at the side.
3) Remove the cover.
4) Pull the rotary brush 9 out of the appliance.
GB
IE
CY
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis