Data interface
Network address
Degree of protection
(EN 60 529)
Operating temperature
Storage temperature
Main power input
Dimensions
1)
11 µA interface upon request
2)
The supply voltage range of the encoder must be maintained; specified cable length applies when HEIDENHAIN cables are used.
3)
Only for "Recording" operating mode
4)
Depends on the version of the firmware; see the User's Manual
Ethernet as per IEEE 802.3
Automatic assignment through DHCP (Dynamic Host Configuration Protocol) or manual assignment
IP 20
0 to 45 °C
–20 to 70 °C
100 Vac to 240 Vac (± 10 %), 50 Hz to 60 Hz (± 2 Hz), power consumption approx. 30 W
Approx. 213 x 155 x 43 mm
25