General Information
The EnDat interface permits the user to save data on his specific machine or system in the memory area for customers.
The data can contain information relevant to machine safety. Therefore, in case of servicing please ensure that this
memory area is updated. Noncompliance with this warning could result in damage to the machine or in personal injury.
Please read the usage and license conditions for the supplied driver software. See also www.heidenhain.de.
Mounting location
The EIB 741 must be installed in a well ventilated area.
Also ensure that the EIB 741 is easily accessible.
Data interface
Data interface
Ethernet as per IEEE 802.3
Network address
Automatic assignment through DHCP (Dynamic Host Configuration Protocol) or manual assignment
Power connection requirements
100 Vac to 240 Vac (± 10 %), 50 Hz to 60 Hz (± 2 Hz), power consumption approx. 30 W
22