Using Proportional Tares - Avery Berkel FX 50 Gebrauchsanleitung

FX50_User.book Page 31 Thursday, August 23, 2007 2:31 PM
4.7

Using proportional tares

N
NOTE: This function is for the USA and Canada variant only.
You can enter the tare weight of items such as a containers as a percentage
proportion of the total gross weight of the item and the tare. For example, you
can enter a proportional tare of 25% if the gross weight of the items you want
to weigh includes a tare weight that is 25% of the gross weight to package the
item.
N
NOTE: At step 6 you can manually enter the unit price of the item or
you can recall the item price using either a direct PLU or an indirect
PLU. Refer to Sections 4.9 - 4.12 for information about PLUs.
FX 50 User Instructions
Fig 4-7. Weighing using unknown tares (continued)
4.7 Using proportional tares
31