Reset The Receiver Collar - Petsafe 400 m Trainer Betriebsanleitung

Reset the Receiver Collar

To reset the Receiver Collar to work with a new Remote Transmitter or to
reprogram a new Receiver Collar to work with your existing Remote Transmitter:
1. Turn the Receiver Collar off.
2. Press and hold the On/Off Button until the Receiver Indicator Light comes on
and the Receiver Collar beeps 5 times.
3. Continue to hold the On/Off button until the Receiver Indicator Light has
turned off.
4. Press and hold the Upper Button on the Remote Transmitter until the Receiver
Indicator Light fl ashes 5 times. You may need to hold both units 0.5-1 m from
each other before this occurs. Once the Receiver Indicator Light has fl ashed 5
times, the Receiver Collar has been reset. If the Receiver Indicator Light does
not fl ash 5 times, start again and repeat the process.
www.petsafe.net 11