Program The Remote Transmitter - Petsafe 400 m Trainer Betriebsanleitung

Program the Remote Transmitter

Note: The Transmitter is factory set to Mode 1. The Mode of the Remote Transmitter can
be changed to fi t your type or style of training.
To change the Mode:
1. Referring to the table below, adjust the Intensity Dial to
the Mode you want to use.
2. Turn the Remote Transmitter over.
3. With a pen or paperclip, depress and release the
Mode button. When the Mode button is pressed, the
Transmitter Indicator Light will be solid in color. When
it is released, it will fl ash the Mode selected.
For example, if Mode 2 is desired, adjust the Intensity Dial to Level 2. Once the
Mode button has been depressed, the Transmitter Indicator Light will be solid, and
once the Mode button is released, the Transmitter Indicator Light will fl ash two
times.
Note: Continuous Stimulation will transmit for no more than eight continuous seconds no
matter how long the button is pressed. To reactivate, release and repress the button.
www.petsafe.net 9