Transmitter Range Chart; Record Your Settings; Place The Boundary Flags - Petsafe Stay + Play Wireless Fence PIF17-13478 Betriebsanleitung Und Trainingsanleitung

Transmitter range Chart

(Note: These distances are approximate.)
Boundary
Boundary
Control Dial
Switch LOW
Position
1
5 m
2
6 m
3
7 m
4
8 m
5
9 m
6
1 1 m
7
13 m
8
14 m
STeP 5

Place the Boundary Flags

The Boundary Flags are visual reminders for your pet of where the Boundary Zone is located. The Receiver Collar
will activate within 0.6 m to 1 m of the Boundary Flags.
1. Using the Test Light, with the Static Stimulation Level set
at 2 or greater, hold the Receiver Collar at your pet's
neck height with the PetSafe
the Transmitter.
2. Walk towards the Boundary Zone until the Receiver
Collar beeps and the Test Light flashes (5a).
3. Place a Boundary Flag in the ground (5B).
4. Walk back into the Pet Area until the beeping stops.
5. Repeat this process around the Boundary Zone until it is
marked with Boundary Flags every 3 m.
The Boundary Flags may be in different parts of the Boundary Zone and may not be in a line. The Boundary Zone
is 0.6 m to 1 m wide.
Boundary
Switch HIGH
1 1 m
12 m
15 m
17 m
20 m
25 m
29 m
32 m
logo facing away from
®
www.petsafe.net

record your Settings

Final
Boundary
Switch
Setting
(HIGH or
LOW)
Home
Camping
Holiday
Other
5a
Final receiver
Boundary Static
Control Stimulation
Dial Level (1-6)
Position
(1-8)
5B
13