Cleaning The Shaving Unit In The Jet Clean System - Philips RQ1145 Bedienungsanleitung

ENGLISH
18

Cleaning the shaving unit in the Jet Clean System

The Jet Clean System has an automatic cleaning program. When you press
cleaning program.
Preparing the Jet Clean System for use
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
The holder automatically moves to the highest position.
,
3 Simultaneously press the release buttons on both sides of the
cleaning chamber (1). Then lift the Jet Clean System off the cleaning
chamber (2).
, The cleaning chamber remains behind.
4
5
between the two lines.
6 Place the Jet Clean System back onto the cleaning chamber.
Make sure the release buttons click back into place.
Using the Jet Clean System
Note: If you use the shaver with shaving foam or shaving gel, we advise you
to rinse it under the hot tap before you clean it in the Jet Clean System.
1 Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.