Intended Use; Package Contents - Renkforce 1582597 Bedienungsanleitung

3. Intended use

This code lock is designed to secure doors against unauthorised access (e.g. in an office). The
code lock can store up to 100 users with different codes (standard user codes) as well as 10
temporary guest codes.
You can use a superuser code to enable/disable access. The code lock gives authorized users
unimpeded access (e.g. during meetings or at night) and prevents unauthorised access.
It also features a relay output (1x switch contact, max. 12 V/DC, 3 A), which can be used to
control a door opener or other devices (e.g. an alarm system).
The code lock must be powered with a 12 V/DC power supply.
The code lock must only be used in dry, enclosed, indoor areas. It must not become damp or
wet!
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
All company and product names are trademarks of their respective owners. All rights reserved.

4. Package contents

• Code lock
• Plastic housing for wall mounting
• 1x diode
• 2x housing screws
• 2x fastening screws
• 2x dowels
• Operating instructions
47