Conrad iDC9607A Bedienungsanleitung Seite 6

Trigger mode
Scan the Trigger standard (Default) configuration barcode in the "Trigger Mode" section
in the quick start guide.
- Trigger always Trigger at any time
- Trigger standard (Default) The trigger can only start a new scan when the files from
direct scan mode have been successfully transferred from the barcode scanner to your
file management device.
Setting
Setting symbologies 1D - 1
CODE 39 ENABLE / DISABLE
CODE 39 Transmit Start/Stop Character
ENABLE / DISABLE
CODE 39 FULL ASCII ENABLE / DISABLE
EAN-8 ENABLE / DISABLE
EAN-13 ENABLE / DISABLE
Setting symbologies 1D - 2
Industrial 2 of 5 default 6 digits (at least)
ENABLE / DISABLE
The length of the Industrial 2 of 5 symbology can be adjusted to a minimum of two digits.
Scan the barcodes 1-6 in the final chapter of the quick start guide (page 7) to configure the
minimal length of an Industrial 2 of 5 barcode to two (left-hand column) or six (right-hand
column).
GS1-Databar (RSS) ENABLE / DISABLE
GS1-Databar (RSS-Limited) ENABLE /
DISABLE
GS1-Databar (RSS-Expand) ENABLE /
DISABLE
CODE 128 ENABLE / DISABLE
GS1-128 UCC/EAN-128 ENABLE /
DISABLE
CODE 93 ENABLE / DISABLE
Setting symbologies 1D - 3
ISSN ENABLE / DISABLE
ISBN ENABLE / DISABLE
UPC-E ENABLE / DISABLE
UPC-A ENABLE / DISABLE
Interleaved 25 ENABLE / DISABLE
Matrix 25 ENABLE / DISABLE
CODE 11 ENABLE / DISABLE
CODABAR ENABLE / DISABLE
MSI ENABLE / DISABLE
Care and cleaning
• Always disconnect the product from the battery charger before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or even impair the functioning of the product.
• Use a dry, lint-free cloth to clean the product. Do not press too hard on the surface when
cleaning to avoid scratch marks.
• Dust can be easily removed using a clean long-haired brush.
Function
Enable/disable CODE 39
Enable/disable CODE 39 Transmit Start/
Stop Character
Enable/disable CODE 39 FULL ASCII
Enable/disable EAN-8
Enable/disable EAN-13
Enable disable Industrial 2 of 5 default 6
digits (at least)
Enable/disable GS1-Databar (RSS)
Enable/disable GS1-Databar (RSS-Limited)
Enable/disable GS1-Databar (RSS-Expand)
Enable/disable CODE 128
Enable/disable UCC/EAN-128
Enable/disable CODE 93
Enable/disable ISSN
Enable/disable ISBN
Enable/disable UPC-E
Enable/disable UPC-A
Enable/disable Interleaved 25
Enable/disable Matrix 25
Enable/disable CODE 11
Enable/disable CODABAR
Enable/disable MSI
Declaration of Conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that
this product conforms to the fundamental requirements and the other relevant regulations of
the directive 1999/5/EC.
The Declaration of Conformity for this product can be found at www.conrad.com.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage ......................... 5 V/DC ± 5 %
Operating current .......................... 170 mA
Charging current ........................... Max. 500 mA
USB cable length .......................... Approx. 1.5 m
Internal rechargeable battery ........ Built-in Li-ion battery, 3.7 V, 900 mAh
Internal memory ............................ 1 MB (can store up to 65,000 datasets for EAN 13
barcodes)
Battery life ..................................... 20,000 - 25,000 scans (after full charge)
Charging time ............................... Approx. 4 - 5 hours (for full charge)
Wireless range .............................. 100 m in open spaces
Working frequency ........................ 2.4 GHz
Bluetooth power class ................. Class 1 (up to 100 mW)
®
Bluetooth profile .......................... HID or SPP or above
®
LCD display .................................. 32 x 25 mm, 128 x 64 pixels
Scan element type ....................... Red LED (610 nm - 640 nm wavelength)
Depth of field ................................ UPCA (13 mil): 50 mm - 620 mm
EAN13 (13 mil): 50 mm - 610 mm
Best resolution .............................. 4 mil
Required contrast ......................... ≥30 % (between printed surface and barcode)
Symbologies ................................. EAN-13, EAN-8, UPC-A, UPC-E, ISSN, ISBN, Codabar,
Code 128, Code 93, ITF-6, ITF-14, Interleaved 2 of 5,
Industrial 2 of 5, Matrix 2 of 5, GS1 Databar, Code 39,
Code 11, MSI
Scan speed..... .............................. 300 scans/second
Scanning angle ............................. Pitch ±60° @ 0° Roll and 0° Skew, Roll ±30° @ Pitch and
0° Skew, Skew ±60° @ Roll and 0° Pitch
Supported operating systems ....... Windows
Vista™ (32/64-bit), 7 (32/64-bit), 8.0 (32/64-bit),
Pro, Enterprise, RT, 10, Android 2.x, Android 3.x,
Android 4.x, Android 5.1 and iOS 5.0, 6.0 or later,
Win 7, Win 7.5, Win 8
Operating conditions ..................... 0 to +50 °C, 20 – 95 % RH (non-condensing)
Storage conditions ........................ -10 to +60 °C, 20 – 95 % RH (non-condensing)
Dimensions (W x H x D) ............... 100 x 27 x 43 mm
Weight .......................................... Approx. 72 g ± 5 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
XP (Home, Pro, with SP1, SP2, SP3) (32-bit),
®
*1424744_v2_0516_02_JH_m_4L_(1)