Delivery Content; Safety Instructions; Operating Elements - Conrad iDC9607A Bedienungsanleitung

Operating instructions
RIOTEC Wireless Pocket Scan 1D Barcode
Scanner iDC9607A
Item no.1424744
Intended use
Use the barcode scanner for quick and reliable scanning of conventional barcodes, such
as UPC or EAN barcodes. The built-in rechargeable battery provides enough power for
20,000 – 25,000 barcode scans. The barcode scanner has a wireless range of 100 m and
therefore is ideal for on-the-go use in shops, warehouses or offices. Data is transmitted
via Bluetooth Class 1. The scanner has a 1 MB internal memory, which can store up to
65,000 EAN 13 barcodes and send them to Bluetooth
It is intended for indoor use only. Do not use it outdoors. Contact with moisture,
e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
®

Delivery content

• Barcode scanner
• Wrist strap
• Quick start guide
• Mini USB cable
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
above. Follow the instructions on the website.

Safety instructions

Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
-capable mobile devices.
®
• Risk of injury! Do not point the product at people or animals.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
b) Rechargeable batteries
• The rechargeable battery is permanently built into the product and cannot be
replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable
battery might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the
product. Due to the rechargeable battery technology being used, you do not need
to discharge the rechargeable battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is
normal that a certain amount of heat is generated during charging.

Operating elements

6
5
4
3
2
1
Charging the barcode scanner
The battery must be charged before using the product for the first time.
When there is insufficient battery power remaining, the LED indicator (2) flashes orange and
you will hear a beep. When the indicator flashes, charge the battery straight away. If the product
has turned itself off, fully charge the battery before turning it on with the trigger (4). To charge
the battery, follow the steps below:
• Pull the cap out of the mini USB port (8).
• Insert the mini USB plug on the USB cable into the mini USB port on the scanner.
• Connect the USB-A connector on the mini USB cable to a USB port on a computer or another
suitable USB power source, such as a USB power adapter.
• The battery level indicator (2) flashes to indicate that the internal battery is charging.
Depending on the remaining battery level, a full charge takes 4-5 hours.
If you previously pressed the power saving button (3) (i.e. the device is in power
saving mode), the LED indicator will not turn on during charging.
• The LED indicator will be lit in orange when the battery is fully charged.
• Remove the product from the USB power source when the LED indicates that the battery is
fully charged. The device is now fully charged and ready for use.
• Insert the cap back into the mini USB port.
The barcode scanner does not automatically enter sleep mode when the battery
is charging.
Pairing the barcode scanner with your mobile device via Bluetooth
Your mobile device must support at least one of the following Bluetooth
Bluetooth HID or Bluetooth
®
Configuring the Bluetooth connection
®
Ensure that your mobile device and the installed software supports the HID or SPP Bluetooth
profiles. Enable Bluetooth on your mobile device. For more information, refer to the instructions
®
for your mobile device. Follow the onscreen instructions to your pair your mobile device with the
scanner. The LED indicator (2) turns red to indicate that the scanner is in pairing mode. It turns
off when the two devices have been paired successfully. The barcode scanner is now ready to
use and can read barcodes and transmit data via the Bluetooth
• Press and hold the trigger (4) for 8 seconds to turn on the barcode scanner.
• To access the Bluetooth settings, select Main>Setup>BTsetup and confirm your selection
®
with ENTER (trigger (4)).
1 Clip (for attaching the strap)
2 LED indicator
7 3 Power saving button
4 Trigger
5 Onscreen keyboard button (displays the
keyboard on the screen, only works with
iOS devices)
6 Scan window
7 Reset button (recessed)
8
8 Mini USB port
SPP.
®
connection.
®
®
profiles:
®
®