GERATHERM tensio control GP-6220 Gebrauchsanweisung Seite 27

PREPARATION FOR USE
Attaching the pressure cuff
1. Free the left wrist of any clothing etc. and wrap the
cuff directly around it. The display should be posi-
tioned on the palm side of the wrist.
2. Fasten the cuff. Make sure it is not too tight. The
cuff's upper edge should be approximately 1 cm
(0.39 inch) from the palm line.
3. If it is not possible to measure on the left wrist,
attach the cuff on the right wrist as shown in the
fi gure.
Measuring posture
1. Sit upright and place your forearm on the storage
case so that the device is at heart level. Relax and
measure in a natural position.
2. Measure and record blood pressure at the same
time every day to establish your blood pressure
pattern.
GB
9 - GB