Troubleshooting - MC Crypt DJ-3565 B USB Bedienungsanleitung

13. Maintenance
Always observe the following safety instructions before cleaning or servicing the device:
• Live components may be exposed if covers are opened or components are removed.
The device must be disconnected from all power sources before carrying out any servicing or repair work.
•
• Capacitors inside the device may still carry voltage even though they have been disconnected from all power
sources.
Only qualified experts familiar with the hazards involved and the relevant regulations may perform repairs.
•
• The device should only be cleaned with a soft, dry cloth or brush from the outside.
• Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the housing.
• Ensure that you do not mistakenly alter the settings for the resting weight or for the anti-skating function.
Make sure that the needle protection is in place while cleaning to avoid unnecessary damage to the pick-up needle.

14. Troubleshooting

Device does not work after the mains switch POWER was switched on.
• Mains plug not inserted properly into the socket.
• The mains socket is not supplied with current.
The device is turned on but no sound can be heard.
• Record player not connected correctly to amplifier / mixer console.
• Wrong input selected at the amplifier/mixer console.
• Volume not adjusted properly at the amplifier/mixer console.
• Speakers not connected properly to the amplifier.
A channel does not work.
• A cinch cable has come off.
• The balance control on the amplifier/mixing console is set incorrectly.
The sound is distorted.
• Stylus force set incorrectly.
• Anti-skating compensation set incorrectly.
• PHONO/LINE switch set incorrectly.
• Pick-up head defective or worn.
Pick-up arm cannot be lowered.
• Pick-up arm counterweight set incorrectly.
There is background noise.
• Record or pick-up needle is dirty.
• Stylus force set incorrectly.
• Anti-skating compensation set incorrectly.
Repairs other than those described above should only be carried out by an authorised specialist.
24