Program Texts - DeguDent Multivac compact Gebrauchsanweisung

Press adjusting button.
Turn the adjusting wheel until the desired program name is shown in the display.
Press the adjusting wheel to change the selected program name.
Turn the adjusting wheel until the desired letter position is shown in the display.
Press the adjusting wheel to change the selected letter.
Turn the adjusting wheel until the desired letter is shown in the display.
Press the adjusting wheel to accept the selected letter.
By pressing the cancellation key
the next (higher) control level.

3.5 Program texts

In this area texts that are displayed during the program course can be changed.
Go to the "programming" operation mode (see section 3.1).
Select the "program texts" area.
Press adjusting button.
Turn the adjusting wheel until the desired program text is shown in the display.
Press the adjusting wheel to change the selected program text.
Turn the adjusting wheel until the desired letter position is selected in the display.
Press the adjusting wheel to change the selected letter.
Turn the adjusting wheel until the desired letter is shown in the display.
Press the adjusting wheel to accept the selected letter.
By pressing the cancellation key
the next (higher) control level.
a process can be terminated at any time and you will enter into
a process can be terminated at any time and you will enter into
27