Changing Settings; Entering Text - Numark iDJ2 Referenzhandbuch

Changing Settings

A Dialog can be used to change settings, in which case each
setting is shown with the active setting highlighted. Its value
can be changed simply by rotating the PUSH TO ENTER knob -
some settings have a textual description for each value, others
have a sliding bar. To change a different setting, press the
PUSH TO ENTER knob. Keep pressing to cycle through all the
settings in turn. Settings usually take effect immediately.
In this example the DJ is changing the mode settings for Deck
B.

Entering Text

A text entry box is used whenever you need to get some text into iDJ², for example while searching for a track or naming
a playlist. Unlike other kinds of settings the text entry box has its own menu which works along with the PUSH TO
ENTER knob to make it easy to enter text with or without a keyboard. A highlighted box on the right shows the character
which you are about to enter and the menu can be used to delete the previous character (Delete), insert a space
(Space), switch between lower and upper case (Caps), and finish entering text (Done).
If you have a USB keyboard connected to your iDJ² you can simply type text directly into a text entry box. This is the
fastest way to enter text. Use the left and right cursor keys to move around within the text you have entered. The Enter
and Tab keys complete text entry the same as the Done menu option.
If you do not have a keyboard connected you can enter characters using the PUSH TO ENTER knob. Rotate left or
right to move through each letter, numeral and symbol. To select the desired character press the PUSH TO ENTER
knob. When you're finished, select Done.
20