Master Code Functions - Renkforce 754389 Bedienungsanleitung

12. Master Code Functions

The master code not only serves to call the programming mode, but also can be used to
activate the relay and the access lock.
The master code named in the examples below, „0000", of course has to be
replaced by the master code programmed by you.
1. Call programming mode
0000 *
+
Input of the master code and pushing of the star key will take you to the programming
mode.
For more information on this, see chapter 10. a).
2. Activate relay
Depending on programming, the relay is activated for a specific time (e.g. 1 second) or
switches on and off alternatingly (see chapter 10. d):
0000 #
+
3. Activate access lock
Depending on programming, the access lock is activated for a specific time (e.g. 1 second)
or switches on and off alternatingly (see chapter 10. d):
0000 #
+

+
2
+
53