Programming Examples - Renkforce 754389 Bedienungsanleitung

11. Programming Examples

Example 1: Operating mode „Single-User"
0000 *
00 #
0 32 #
 32 #
2 654 #
40 2 #
5 #
72 0 #
*
48
Call programming mode with the master code (basic
setting ex works „0000"), the yellow LED is lit perma-
nently
Attention - if another master code is already programmed,
it must of course be used!
Use operating mode „Single-User" (pre-set at delive-
ry)
Attention - if the operating mode „Multi-User" has been
activated first, this will delete all codes and pre-settings
(except for the master code)!
Programme master code to „3289"
Programme user code to „8321"
Programme code for access lock to „6854"
Relay output is activated for 2 seconds at correct user
code
Access lock is to work in toggle operation at correct
code (the access lock is activated or deactivated at
every input of the code)
Code lock is locked for 15 minutes after 10 wrong code
inputs
Terminate programming mode; then the yellow LED
flashes slowly (standby)