Placing The Magnetic Strips; Charging The Robot - Blaupunkt XEASY Benutzerhandbuch

4.4

Placing the magnetic strips

Place the magnetic strip on the floor to prevent the robot from bumping
into objects.
The robot will detect the magnetic strip and move the other way. Figure 9
shows some examples of how you can use the magnetic strips.
Figure 9 - Use of the magnetic strips
4.5

Charging the robot

NOTICE
Before the first use, ensure that the robot is charged for 12 hours.
There are two ways to charge the robot:
•
In the charging station, see Figure 10. The power light on the charging
station will light up when charging is underway.
•
With the power adapter directly connected to the robot. To do this,
insert the adapter into the robot and plug the other end into a power
socket, see Figure 11.
Figure 10 - Charging the robot with the charging station
EN
43