Placing The Batteries In The Remote Control - Blaupunkt XEASY Benutzerhandbuch

Figure 11 - Charging the robot directly with the power adapter
NOTICE
•
Normally it takes approx. 4 hours to fully charge the battery.
•
When fully charged, the light of the robot becomes solid blue and the
robot will emit 5 short buzzes.
•
When the battery is low, the light of the robot becomes solid red and the
robot will emit 4 short buzzes.
44
4.6

Placing the batteries in the remote control

Remove the lid and insert the batteries into the remote control
(see Figure 12). Place the lid back on the battery compartment.
Figure 12 - Placing the batteries in the remote control