Switching On The Machine And Selecting A Programme; Switching On The Machine; Changing A Programme - Nabo GSI 1500 Gebrauchsanweisung

SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME

Switching on the machine

The lamp on Program Start/Pause key
goes off once the Program starts and
the washing lamp is highlighted.
Program followup
You can follow the program flow using the program follow-up lambs located on the control panel.
As long as washing continues, the lights
of washing, rinsing and drying are on
respectively. Machine remains silent for
about 40-50 minutes when the drying
lamp is on.
Once the program is over, the
lamp Finished is illuminated.

Changing a programme

If you would like to change programs while a washing program is continuing.
Press once the Power
Start/Pause key.
Once the Power On/Off key
is pressed, the lamp Power
Start/Pause is highlighted.
After the program stops, select
your desired program via the
Program selection button.
1.
2.
dishes via the Program Selection
button.
3.
you can choose additional
function.
4
the Power Start/Pause key.
Do not open the cover before
the lamp Finished is on.
28
Press the Power On/Off key.
Select the program suiting your
If you prefer or wish to prefer,
Start the program pressing
The new program started
will resume the course of
the old program.
Start the program you have
newly selected by pressing
again the Start/Pause key.