Signal Strength - Conrad 75 20 01 Bedienungsanleitung

The "Battery" LEDs (2, 12) light up green while the built-in battery of the receiver or
the camera is being charged.
The "Battery" LED (2, 12) goes out when the battery is fully charged.
During the charging process, proper operation between the receiver/monitor
and the camera cannot be ensured.
After charging, unplug the wall power supply from the receiver/monitor or the
camera.

11. Signal strength

An aerial symbol is displayed in the top left-hand corner of the screen. Four vertical
bars are displayed next to the aerial symbol. They indicate the signal strength (max.
4 bars = best reception quality).
Signal Number of
displayed
bars
Optimal 4
Good 3
Normal 2
Poor 1
No signal 0
* VGA image frequency is used in normal display mode (= zoom mode not active).
** QVGA image frequency is used in zoom mode (see chapter „17. Zoom mode").
40
Data rate in
Kbps
1062 ~ 1280
725 ~ 1062
543 ~ 725
250 ~ 543
0 ~ 250
VGA * Image QVGA ** Image
frequency frequency
(frames per (frames per
second) second)
5 ~ 10 15 ~ 30
3 ~ 5 12 ~ 20
2 ~ 4 8 ~ 15
0 ~ 1 0 ~ 4
0 0