Conrad 75 20 01 Bedienungsanleitung Seite 31

• In commercial institutions, the accident prevention regulati-
ons of the Employer's Liability Insurance Association
for Electrical Systems and Operating Materials are to be
observed.
• The provided receiver, camera and wall power supplies are
intended for dry indoor use only.
• The wall power supplies are protection class II products.
• It is only permissible to use the provided wall power supplies
to power the camera and the receiver/monitor.
• Ensure that all the electrical connections and connection
cables between devices and any extension cables comply
with regulations and the operating instructions.
• Electronic devices are no toys and should be kept out of the
reach of children!
• Live components may be exposed if covers are opened
or parts are removed (unless these parts are intended to be
removed without tools). Connection points may also be live.
If the device needs to be opened for calibration, servicing,
repair or replacement of parts or components, it must be dis-
connected from all voltage sources first. Any necessary servi-
cing or repair on the open device must be carried out by a spe-
cialist who is familiar with the risks involved and the relevant
regulations.
• Capacitors in the device may still be charged even after it has
been disconnected from all power sources.
• The wall power supply/power line must not be plugged in or
unplugged with wet hands.
• Never pull on the cable of the wall power supply. Always
unplug it by pulling out the housing.
• When setting up the device, make sure that the connection
cables do not get squeezed or damaged by sharp edges.
• Remove the wall power supply from the mains socket if the
device is not in use for a longer period of time. Always pull the
wall power supply out of the mains socket before cleaning the
device.
31