Health Aqua Technology Aqua-Q Bedienungsanleitung Seite 29

Flushing out the "Aqua-Q" device:
1. First check that your "Aqua-Q" is connected correctly and that all water hoses are firmly
attached and do not contain any kinks or bends.
2. You should now open the water inlet on the cold water collection and turn the lever on the
stopcock so that it is facing the water hose. You will be able to hear the water flowing through the
"Aqua-Q" . You can now plug in the water filter system. Your "Aqua-Q" device will now
produce filtered water and initially use this water to flush out the filters.
3. Leave your "Aqua-Q" to run for approx. 30 minutes.
4. You can now start to use your filter system.
29