Werbung
Mode d'emploi
Après que tous les branchements aient
été effectués, le kit de diffusion
radioélectrique est en ordre de marche.
Connectez le transmitter et le receiver
avec le commutateur ON/OFF (2).
Connectez les appareils AV (audio/
vidéo) et les appareils de diffusion.
Maintenant, les signaux audio et vidéo
sont transmis de l'appareil source AV à
l'appareil de diffusion.
Pour la commande de l'appareil source
AV, dirigez la télécommande sur l'écran
récepteur IR sur le receiver (écran ovale
partie frontale) et actionnez la touche
radio souhaitée
Déconnectez, après l'utilisation du
transmitter et du receiver, à l´aide du le
commutateur ON/OFF (2).
58
Notice d'Emploi
Francais
Mais les deux appareils doivent tou-
jours être réglés sur le même canal.
Push switches to the ON position.
The operational status indicators illumi-
nate in the oval windows at the front.
Possibly the playback must be started
at the playback unit and the AV input
activated at the AV source device.
See the related operating instructions
for this.
Should problems occur with picture or
sound, please refer to "Troubleshoo-
ting".
The remote control signal is transfered
via radio to the AV source device.
Set switches to the OFF position.
Setup
In order to ensure a successful setup, read this operating guide
and safety information thoroughly and carefully before use!
Positioning
No equipment with strong electrical fields, e.g. radio telephone,
radio, electrical engine, etc. should be in the proximity of the
radio transmission set.
The set can also be affected by interference ("irradiation") from
tuners, television sets, etc. Keep as large a distance as possible
to such devices.
Also metal surfaces, reinforced concrete walls, and proximity to
strong electrical or electromagnetic fields, like electric motors,
radio communication systems etc. will reduce the range.
Given the variety of lacquers and polishes used on furniture, it
is not impossible that the equipment feet could leave visible
residue on furniture caused by a chemical reaction. The devices
should therefore not be placed on valuable furniture surfaces
without suitable protection.
• Set up the transmitter in the proximity of the AV source device (e.g. video recor-
der).
• Set up the receiver in the proximity of the playback unit (e.g. TV).
31
Werbung
Kapitel
Fehlerbehebung
