Instructions For The Installer; Installation Example - Tomek TX RX01 Gebrauchsanleitung

1 - INSTRUCTIONS FOR THE INSTALLER

1.1 - INSTRUCTIONS AND REQUIREMENTS FOR INSTALLING THE RECEIVER
Install the receiver at a height that allows the antenna to stick up above any nearby metal container (boiler, expansion tanks, metal
G
cabinets); avoid positioning the antenna near cables and electrical panels (fig. 1.i - fig. 2.i)
G
B
B
Cabinets, walls and slabs containing metal can limit the operation of the product
This system is incompatible with radio products a working on the same frequency
(868,35 MH) using permanent emission mode.
Important: installation and electrical connections of devices and appliances must be carried out by skilled people and in com-
pliance with current regulations. The manufacturer declines any liability in connection with the use of products subject to spe-
cial environmental and/or installation standards. Exemples given in the manual are purely indicative.
Instructions relative to the structure of realizable systems and the assignment of areas to individual timer-thermostats or
thermostats are shown in the technical documentation for the transmitter devices (chronothermostats and/or thermostats).
DIMENSIONS
ON
RESET
133
4

INSTALLATION EXAMPLE

Chronothermostat
25
Tomek GmbH - haustechnik@tomek.at -- 01/61003-0
.
INSTALLATION
Receiver
Burner
Fig. 1.i
OK
ON
RESET
ON
RESET
Fig. 2.i