Package Contents; Mains Connection; Safety Instructions - Renkforce Concert W1 Bedienungsanleitung

G Operating Instructions
W1 WLAN Concert Loudspeaker
Item no. 1230938
Intended use
The WLAN loudspeaker is used to play back music in a WLAN network via DLNA or
AirPlay compatible end devices.
®
This product is only approved for connection to a 100-240 V/50/60 Hz alternating current.
Devices that are equipped with a USB charging or power supply socket can be
charged or operated with the additional USB output.
The product may only be used in enclosed indoor locations. Outdoor use is not al-
lowed. Contact with moisture, for example in bathrooms or the like, must be avoided.
Any use other than that described above will lead to damage to this product and will
expose you to additional risks, such as short circuits, fire, electrical shock, etc.
This product must not be modified or converted.
Always observe the safety instructions and all other information included in these op-
erating instructions.
This product complies with the applicable national and European regulations. All com-
pany and product names are the trademarks of their respective owners. All rights
reserved.
Package contents
• WLAN loudspeaker
• Set of connector cables
• Base for mobile devices
• Operating instructions
Explanation of symbols
This symbol indicates specific risks associated with handling, function and
use.
The arrow symbol indicates special information and advice on operating the
device.
Safety instructions
F irst, read the complete operating instructions carefully, as they contain
important information about proper operation of the device.
D amage due to failure to follow these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
W e do not assume any liability for personal injuries and material damages
caused by the improper use or non-compliance with the safety instruc-
tions! In such cases any warranty claim is void!
• For safety reasons, any unauthorised conversion and/or modification to
the product is not permitted.
• The device is designed according to protection class II. Only a proper
mains socket (100-240 V/50/60 Hz) of the public power supply grid may be
used as voltage source.
• Check the device for damage frequently. If it shows signs of damage, dis-
continue use of the product and take it to a specialist workshop.
• If the mains cable is damaged, do not touch it. First, switch off the appro-
priate mains socket (e.g. via the respective circuit-breaker and the RCD)
and then carefully pull the mains plug from the mains socket.
• Make sure the mains cable is not pinched, bent, damaged by sharp edges
or otherwise subjected to mechanical strain. Avoid excess thermal stress
on the mains cable due to excessive heat or cold. Do not modify the mains
cable. This may damage the mains cable. A damaged mains cable can
result in a life-threatening electric shock.
• In order to completely disconnect the device from the power supply grid,
the mains plug must be pulled out of the mains socket. Simply turning the
device off with the on/off switch is not enough.
• This product is not a toy; it is not suitable for children. Children are not
aware of the potential dangers involved when using electrical devices.
• Never pour liquids over electrical devices and never place objects filled
with liquid on top of them (e. g. vases). You run the risk of causing a fire
or a fatal electric shock. If this is the case, de-energise the appropriate
mains socket (e.g. switch off circuit breaker and RCD) and then remove
the mains plug from the mains socket. Disconnect all cables from the de-
vice. The product must no longer be used after that; take it to a specialist
workshop.
• Never touch the mains plug when your hands are wet.
• Ensure there is adequate ventilation for the device during operation. Do
not cover the ventilation openings of the device with magazines, table
cloths, curtains, etc.
• Do not expose the device to high temperatures, dripping or spraying wa-
ter, strong vibrations or heavy mechanical stress.
• Do not place naked flames such as burning candles on the device.
• If you have doubts about how the equipment should be operated or how to
safely connect it, consult a trained technician.
• Do not operate the device when it is unattended.
• Only use the device in temperate climates, and avoid tropical environ-
ments.
• Do not leave packaging materials unattended. It may become a dangerous
plaything for children.
• Moreover, please observe the additional safety instructions in the indi-
vidual chapters of these operating instructions.
• Also observe the safety and operating instructions of any other devices
that are connected to this device.
• If you are not sure how to connect the device correctly or if questions
arise which are not covered by the operating instructions, please do not
hesitate to contact our technical support or a specialist.
Mains connection
B efore plugging in the mains plug, ensure that the voltage indicated on the
device is compatible with the mains voltage available. Do not connect the
device if the data doesn't agree with the available mains voltage. Incorrect
supply voltage can cause serious damage.
B e careful when handling the mains cables and mains connectors. The
mains voltage can cause serious electric shocks, which can be fatal.
T he mains socket to which the device is connected must be easily acces-
sible, so that it can be quickly isolated from the mains voltage in the event
of a fault.
D o not leave the cables trailing free; route them in an orderly and profes-
sional way to prevent accidents.
• Connect the power supply cable enclosed to the mains connection at the back of
the device.
• Plug the power unit into a wall outlet of the public power supply grid.
• The ON/OFF toggle switch is used to switch the device on or off.
Position ON: Device is turned on.
Position OFF: Device is switched off.