Waeco MagicTouch MT350 Montage- Und Bedienungsanleitung Seite 53

MagicTouch MT350
One +12 V and negative pulse control cable: fig. k, page 15
For the connection to the WAECO central locking system ML-44(22) IR: fig. l,
page 16
Note
I
Check whether the indicators flash once on locking with the remote control.
If they flash twice, you will need to re-connect the blue/red cable to the black
cable and the grey/red cable to the red cable of the control unit.
Connection to the WAECO central locking system ML-44(22): fig. m, page 17
Note
I
Check whether the indicators flash once on locking with the remote control.
If they flash twice, you will need to reconnect the grey/red cable to pin 5 and
the blue/red cable to pin 10 of the control unit.
➤ Insulate any unconnected cables.
7.7 Vehicle-specific data
Caution!
e
Check the polarity before connecting.
The following table is not intended to be understood as being complete. You can
obtain information on other vehicles on request from WAECO.
We reserve the right to make alterations.
CL = central locking
Electrical connections
53