Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
• The product does not feature an on/off switch. The product turns on directly after
the batteries have been inserted.
• When the product is turned on, the red LED flashes once every second.
• To turn off the product, remove the batteries.
Maintenance and cleaning
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
• Never point a water jet, for example such of high‑pressure cleaning equipment, at
the lamp, as that could damage the seals!
• Do not apply too much force to the housing in order to avoid scratching.
• Besides occasional cleaning, the device is maintenance‑free.
• Use a clean, soft and dry cloth to clean the housing. For more stubborn dirt, slightly
moisten the cloth with a little lukewarm water.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
Remove any inserted (rechargeable) batteries and dispose of them
separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to
indicate that disposal in the domestic waste is forbidden. The designations
for the heavy metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead
(name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your
municipality, our stores or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Power supply .......................................2 x 1.5 V battery type AA (not included)
Power input ..........................................≤1 mA
Number of LEDs...................................1 red flashing LED
Operating conditions .........................‑10 to +60 °C, 0 – 85 % RH
Storage conditions..............................‑10 to +60 °C, 0 – 85 % RH
Dimensions (W x H x D)......................284 x 86 x 150 mm
Weight ...................................................240 g
38 LED dummies
This is a publication by Conrad Electronic SE, Klaus‑Conrad‑Str. 1, D‑92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
V1_1015_02‑ETS‑Mkd
Werbung
Inhaltsverzeichnis
