Ventilation; Locking System; Storing The Helmet - SCHUBERTH C3 Gebrauchsanweisung

H. MAINTENANCE AND CARE

5. VENTILATION

Ventilation cowl
If necessary, the head ventilation system's air inlet cowl can be
removed to enable cleaning of the ventilation mechanism.
1. To do this, fi rst remove the operating
element by simply taking it out
upwards from the ventilation cowl.
2. Having done that, slide the fl at end
of the operating element under the
edge behind the ventilation cowl
and remove the latter by levering it
upwards.
3. On completion of the cleaning, fi x
the ventilation cowl back in place
by hooking it into the front of the
ventilation mechanism and pressing
onto the helmet shell until you hear a
clearly audible "click".
106
4. When this has been done, insert
the operating element through
the ventilation cowl and into the
ventilation mechanism.

6. LOCKING SYSTEM

Ratchet fastener
The lock system's metal components require no maintenance.

7. STORING THE HELMET

When not in use, keep the helmet in the supplied helmet bag in a
dry, safe place. Always store the helmet so that there is no risk of it
falling onto the fl oor. Damage caused this way is not covered by the
guarantee.
Note:
Store the helmet out of reach of children and animals.
107